42
As long as the pitch control is in center “detent” click position, the turntable is operated at selected speed.
The speed can be increased or decreased by 10% by the pitch control.
An incorrect adjustment done on purpose can also be used to have the turntable rotate extremely slow or
fast.
The strobe dots at the edge of the turntable are used for speed monitoring.
Clean the stylus periodically with a soft brush to prevent the accumulation of dust.
When sound becomes distorted or noisy, check the stylus. If the stylus is worn out, replace it with a new one.
From time to time, the
transparent dust cover and turntable cabinet should be wiped down with a soft, dry cloth.
Volatile materials should not be used, such as: alcohol, thinner, benzine etc. They may remove the paint or
damage the luster.
1. 45-rpm Adaptor
This adapter allows you to play standard 7” EP vinyl
records with large center holes. Place the adapter
on the CENTER SPINDLE 7" records.
2. Turntable Platter
This platter connects directly to the center spindle.
The platter and center spindle holds a vinyl record
perfectly center. The platter also spins the record
at a consistent speed.
3. Strobe Indicators
The PLATTER has four rows of indicators. These
indicators are used to visually detail various stages
of pitch. The indicators are illuminated by the
STROBE INDICATOR PILOT LAMP. Each row
may appear to stand still at different pitch levels.
Note: The use of heavy fluorescent lighting directly
above the turntable will defeat the STROBE
LAMP PILOT LAMP affect indicator accuracy.
To Next Page
Loading...
