Need help?Do you have a question about the Akai AP-Q310 and is the answer not in the manual?
General| Motor | DC servo motor |
|---|---|
| Platter | Aluminum die-cast |
| Effective length | 220 mm |
| Overhang | 15mm |
| Output | 2.5mV |
| Tonearm | Static balance type |
| Cartridge weight range | 4-6g |
| Speeds | 33 and 45rpm |
| Cartridge | VM type |
| Power Supply | AC 50/60Hz |
Procedures for ensuring electrical safety after repairs.
Guidelines for safe component handling and replacement during repairs.
Technical details and performance characteristics of the turntable.
Step-by-step instructions for disassembling the turntable.
Identification and function of all external controls and indicators.
Diagram showing the placement of key internal components.
Instructions for changing voltage settings and cycle compatibility.
Procedures for basic operational adjustments like stylus pressure.
Steps for adjusting mechanical aspects like tone arm lifter and brake.
Procedures for calibrating electronic circuits and voltage levels.
Listing and identification of different printed circuit boards used in the unit.
Guide on reading and utilizing the parts list for ordering.
Identification of critical parts for stocking and repair.
Exploded views and part numbers for assembled units.
Exploded views for the final assembly stages of the unit.
Pinout and internal structure diagrams for integrated circuits.
Overall circuit diagram for the AP-Q310/C model.
To Next Page
