Need help?Do you have a question about the Akai AP-Q55 and is the answer not in the manual?
General| Motor | DC servo motor |
|---|---|
| Overhang | 15 mm |
| Output | 2.5mV |
| Power Supply | AC 120V, 60Hz |
| Speeds | 33, 45rpm |
| Platter | Aluminum die-cast |
| Cartridge weight range | 4 to 8g |
| Signal to noise ratio | 65dB |
| Tonearm | Static balanced type |
Detailed specifications including speed, rumble, and power requirements for the AP-B21/C.
Procedures for adjusting turntable mechanisms like capstan height, arm lifter, and auto-return.
Identification and composition of printed circuit boards used in the AP-B21/C model.
Specifications for AP-D33/C and AP-Q55/C turntables, covering drive, motor, and frequency response.
Step-by-step guide for safely disassembling the turntable unit for maintenance.
Identification and function of all controls on AP-D33/C and AP-Q55/C models.
Diagrams showing the location of major internal components for AP-D33/C and AP-Q55/C.
Instructions for converting voltage and cycle settings for different regions.
Procedures for adjusting stylus pressure, overhang, and auto-return for AP-D33/C and AP-Q55/C.
Steps for calibrating electrical parameters for AP-D33/C and AP-Q55/C models.
Lists and details the composition of various P.C. boards for AP-D33/C and AP-Q55/C.
Guide on interpreting part numbers, reference numbers, and descriptions for ordering.
Exploded view and part list for AP-B21/C assembly blocks.
Exploded views and part lists for AP-D33/C assembly blocks.
Exploded views and part lists for AP-Q55/C assembly blocks.
Detailed circuit diagram for the AP-B21 turntable, showing component connections.
Detailed circuit diagram for the AP-D33/C turntable, illustrating electrical pathways.
Detailed circuit diagram for the AP-Q55/C turntable, showing internal circuitry.
To Next Page
