Need help?Do you have a question about the Akai AP-D33 and is the answer not in the manual?
General| Drive Type | Direct drive |
|---|---|
| Output | RCA |
| Platter | 310 mm diameter |
| Overhang | 15 mm |
| Dimensions | 440 x 140 x 365 mm |
| Weight | 8.5 kg |
| Speed | 33, 45 rpm |
| Platter Material | Aluminum |
| Tonearm Type | Static Balance |
| Motor | DC Servo |
| Tonearm | Static balance type |
| Cartridge weight range | 4 to 8g |
| Speeds | 33 1/3 and 45 RPM |
| Frequency Response | 20Hz-20kHz |
Detailed specifications for the turntable, including performance metrics and physical dimensions.
Procedures for adjusting mechanical components like capstan height and tone arm.
Lists titles, numbers, and composition of various P.C boards.
Detailed specifications for the AP-D33/C turntable, including performance and dimensions.
Step-by-step instructions for safely dismantling the turntable unit.
Identification and description of all controls on the AP-D33/C turntable.
Diagram showing the bottom view and location of principal parts for AP-D33/C.
Procedures for converting voltage and information on cycle conversion.
Detailed instructions for adjusting stylus pressure on the turntable.
Steps for adjusting offset voltage, torque difference, and speed for AP-D33/C.
Lists P.C board titles, numbers, and composition for AP-D33/C.
Exploded view illustrating the assembly of the AP-B21/C turntable.
Parts list for the D.D Servo P.C Board and Fuse P.C Boards of AP-D33/C.
Parts list for the Quartz Servo P.C Board and Fuse P.C Boards of AP-Q55/C.
Schematic diagrams for ICs AP-400-A, TA75458S, and TC4011BP.
Detailed schematic diagram for the AP-B21 turntable.
Detailed schematic diagram for the AP-D33/C turntable.
Detailed schematic diagram for the AP-Q55/C turntable.
To Next Page
