Need help?Do you have a question about the Akai AP-207 and is the answer not in the manual?
General| Speeds | 33 1/3 and 45 RPM |
|---|---|
| Motor | DC servo motor |
| Effective length | 220mm |
| Overhang | 15mm |
| Platter | Aluminum die-cast |
| Tonearm | Static balance S-shaped tonearm |
| Cartridge weight range | 4 to 9g |
Detailed technical specifications for the Akai AP-207 turntable.
Detailed technical specifications for the Akai AP-307 turntable.
Detailed explanation of the servo circuit's operation for speed control.
Guide for setting the correct tracking force for the stylus.
Instructions for aligning the tonearm overhang for optimal tracking.
How to adjust automatic tonearm lead-in and lead-out functions.
Calibration steps for the direct drive PC board.
Calibrating speed settings using VR2 and VR3 controls.
Detailed circuit schematic for the Akai AP-207 turntable.
Detailed circuit schematic for the Akai AP-307 turntable.
To Next Page
