Akai AP-207

@ SPINOLE H
@ GROOVE Sy Le
@ TABLE SHEET 15 mm
. OVERHANG ADJUSTMENT(Refer to Fig. 9)
The distance between the turntable spindle and the
stylus when the tone arm is at the center of the turn
table is called overhang. Different cartridges require
different overhang adjustments. For your conve-
nience, the rubber turntable mat had indicator groove
at the center for easy overhang adjustment. Bring the
tone arm to the center of the turntable. Adjust the
cartridge position in the cartridge shell so that the
stylus position is even with the outside groove ring.
The cartridge position is adjustable by resetting the
screws on the cartridge shell.
— -—O
Fig. 9
13