Need help?Do you have a question about the Akai AP-005 and is the answer not in the manual?
General| Drive method | Belt drive |
|---|---|
| Motor | 4-pole synchronous motor |
| Speeds | 33 1/3 and 45 rpm |
| Signal to noise ratio | 50dB |
| Effective length | 220 mm |
| Overhang | 15 mm |
| Output | 2.5mV |
| Platter | Aluminum die-cast |
| Tonearm | Static balance type |
| Cartridge weight range | 4 to 10 grams |
Provides detailed specifications for the turntable's sections and general operation.
Step-by-step instructions for disassembling and reassembling the turntable.
Diagrams showing the placement of major internal components.
Guides for adjusting the automatic pick-up arm's start and end positions.
Adjusts the pick-up arm's starting point on a record for correct playback.
Adjusts the pick-up arm's stopping point on a record for automatic operation.
Instructions on how to change the motor pulley for 50Hz/60Hz operation.
Guidance on stylus life, replacement, lubrication, and cleaning.
Covers stylus wear, replacement procedure, and record cleanliness.
Recommends when and how to lubricate motor and moving parts.
Electrical diagrams illustrating internal connections and component layouts.
A comprehensive chart for diagnosing and resolving common turntable issues.
Instructions on how to read and interpret the parts list for ordering.
Lists and identifies parts for the first major assembly group.
Lists and identifies parts for the second major assembly group.
Lists and identifies parts related to the turntable's external cabinet and housing.
To Next Page
