To Next PageTo Next Page
Need help?Do you have a question about the Akai AP-M313 and is the answer not in the manual?
Essential safety measures to follow before and during repair procedures.
Procedures to verify safety compliance after repair work is completed.
Explanation of symbols used to indicate primary destinations for the unit.
Instructions for converting the voltage selector on the rear panel.
Instructions and diagrams for removing the platter and dust cover.
Steps for accessing internal components by removing the bottom cover.
Description of key buttons, switches, and indicators for operating the unit.
Component that covers the platter and protects records during playback.
Selector to set the record size (17cm or 30cm) for proper playback.
Selector to set the playback speed for 33 or 45 RPM records.
Protective cover for the turntable to prevent dust accumulation.
Details on mechanical adjustments, noting they are usually not necessary.
Procedure for adjusting the tonearm's elevation and tracking position.
Steps to adjust the sensitivity of the tracking sensor for accurate playback.
How to adjust the platter speed for 33-1/3 and 45 RPM records.
Procedure for setting the correct starting point for the tonearm on a record.
Guide on how to interpret and use the provided parts list effectively.
List of parts for the head base block assembly.
List of components and parts for the main printed circuit board.
List of parts related to the PC board block assembly.
Specific parts for the system control printed circuit board.
Parts list for the switching printed circuit board.
General
