Need help?Do you have a question about the Akai AP-003 and is the answer not in the manual?
General| Drive method | Belt Drive |
|---|---|
| Speeds | 33 1/3 and 45 RPM |
| Signal to noise ratio | 50dB |
| Effective length | 220mm |
| Overhang | 15 mm |
| Tonearm Shape | S-shaped |
| Cartridge Type | MM (Moving Magnet) |
| Output | RCA |
| Power Supply | AC 100V, 50/60 Hz |
| Platter | Aluminum die-cast |
| Tonearm | Static balance type |
| Cartridge weight range | 4 to 9g |
Essential safety precautions to prevent fire or shock hazards.
Instructions for using the optional sub-weight with heavier cartridges.
Guide for installing and using the 45 RPM adapter for single records.
Steps for attaching the protective dust cover to the turntable.
Diagrams and instructions for connecting the turntable to audio systems.
How to change between 33-1/3 and 45 RPM playback speeds.
Step-by-step guide for playing records from start to finish.
Instructions for lubricating the turntable mechanism.
Importance of stylus cleanliness and when to replace a worn stylus.
Advice on drive belt care to prevent slippage and ensure accurate speed.
Addresses common audio problems like howling and induced humming.
List of included accessories with the turntable.
To Next Page
