Akai AX80 Operator's Manual

bee
Power requirements
Power requirements for electrical equipment differ from area to area.
Please ensure that your machine meets the power requirements in your
area.
If in doubt, consult a qualified electrician.
120 V, 60 Hz for USA and Canada
220 V, 50 Hz for Europe except UK
240 V, 50 Hz for UK and Australia
110 V/120 V/220 V/240 V, 50/60 Hz
convertible for other countries.
Voltage conversion
Models for Canada, USA, Europe, UK and Australia are not equipped
with this facility. Each machine is preset at the factory according to its
destination, but some machines can be set to 110 V, 120 V, 220 V or
240 V as required.
If your machine's voltage can be converted:
Before connecting the power cord, turn the VOLTAGE SELECTOR locat-
ed on the botton panel with a screwdriver until the correct voltage is in-
dicated.
120V
240V
CAUTION
ISA OF ELECTMIC SHOCK
00 мот oren
ER.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with the arrowhead symbol superimposed across
e agraphical representation of a person, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “danger-
ә ous voltage" within the product's enclosure; that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intented to
e alert the user to the presence of important operating and mainte-
nance (servicing) instructions in the literature accompanying the ap-
* pliance.
Precautions
FOR CUSTOMERS
IN THE UK
IMPORTANT FOR YOUR SAFETY
The flex supplied with your machine will have either two wires or three,
as shown in the illustrations.
THREE CORE FLEX WARNING
THIS APPARATUS MUST
BE EARTHED IMPORTANT
The wires in this mains lead are coloured in
accordance with the following code:
Green-and-yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead
of this apparatus may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows: The wire which
is coloured green-and-yellow must be con-
nected to the terminal in the plug which is
marked by the letter E or by the safety earth
symbol , or coloured green or coloured Blue Brown
green-and-yellow. (Neutral) (Live)
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the termi-
which is marked with the letter L or coloured red.
TWO CORE FLEX
IMPORTANT PLUG
The wires in this mains lead are coloured in
accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead
of this apparatus may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows: The wire which
is coloured blue must be connected to the
terminal which is marked with the letter N or
i
:
{
{
{
й
Й
coloured black.
The wire which is coloured brown must be Siue в
connected to the terminal which is marked (Neutral) (Live)
with the letter L or coloured red.
Do not connect any wire to the larger pin marked E or when
wiring a plug. Ensure that all terminals are securely tightened and
that no loose strands of wire exist.

Akai AX80 Specifications

General

Brand	Akai
Model	AX80
Category	Synthesizer
Language	English