Akai GX-F25

—
NOHLON
10.
CONTROLS
®
SHOCK NAZARO—DO NOT OPEN!
RISQUE O€ CHOC —NE PAS ENLEVER!
GERUHRUNGSGEFAHA ~~ NICHT OFFKEN!
u
OST Laseeatenst
Eom
. TIMER START SWITCH
REC: Set to this position for absentee recording with a
timer.
OFF: Set to this position at all other times when the Timer
Start operation is not to be engaged.
PLAY: Set to this position for timed playback with a timer.
. EJECT Button
CASSETTE RECEPTACLE
AUTO SYSTEM Selector
LED Bar Meters
. +3dB and +7dB Peak Indicators
LEFT —®- RIGHT RECORDING LEVEL
Controls
» coaxial controls and enumerated positions facilitate easy
fade-in (gradual increase in volume at the beginning of a
musical selection) and fade-out (gradual decrease in
volume at the end) recording operations.
. MICROPHONE Jacks (left and right)
Connect one microphone to the left jack for monophonic
recording.
*Some models have MONO MIC jack. Connect to this jack
for monophonic recording.
- HEADPHONE Jack
Accommodates stereo headphones of 8 ohms impedance for
monitoring or private headphone listening.
DOLBY NR and FILTER Switch and Indicator
DOLBY NR ON, FILTER OFF
Use for recording and playback with Dolby NA.
HEN LILES Ftge peo LansEsTONET
“HOMES LICEBSE OF DN00E La PeEssits. SiLsiER™
1 _
12.
13.
14,
15.
16.
17.
18.
19.
20.
ae TEE Cad STSCH ast Teset Gees
Fig. |
DOLBY NR ON, FILTER ON
Use for recording with Dolby NR from FM stereo broadcasts.
DOLBY NR OFF
Use for recording and playback without Dolby NR.
. TAPE SELECTOR
Set to position corresponding to the tape for the correct
equalization and bias adjustment.
LN — Low noise tapes
LH — Low noise high output tapes
CrQ2 — Chrome oxide tapes
METAL — Metal tapes
QUTPUT Control
Adjusts line output and headphone volumes.
TAPE COUNTER and RESET Buttons
Operating Buttons
Power Switch
LINE/DIN Selector (Some models do not have this facliry.}
LINE IN Jacks (left and right)
DIN Jack (Some models do not have this facility.)
Can be used instead of The LINE INPUT and OUTPUT § acks
for connection with an external! amplifier
through a DiN connection cord. .
LINE OUT Jacks (left and right) -
REMOTE CONTROL Jack
Connect the optional Remote Control Unit RC-21 for ennote
control operation.
Use only an AKAI recommended connecting cord.