Akai head rush e2

LOOP TIME switch
You can select the maximum recording time between NORMAL and EXTEND depending on your needs.
NORMAL : This offers the best sound quality.
 Sampling Frequency: 44.1 KHz / Maximum Recording time: 23.8 seconds (11.9 seconds on
Over-Dub)
EXTEND : This offers the maximum recording time.
 Sampling Frequency: 29.4 KHz/ Maximum Recording time: 35.6 seconds (17.8 seconds on
Over-Dub)
Specifications
Connectors
INPUT (Input impedance : 500k ohms or more)
MIX OUT (Output impedance : 1k ohms or less)
HEAD1/E FFE CT - HEAD4 (Output impedance : 1k ohms)
DC IN (9Volts)
Controls
LEVE L, HF DAMP, FE EDBACK, TIME COARSE /T IME, T IME FINE/HEAD GAP ,
RATIO, MODE SELECT, LOOP LEVEL, LOOP TIME, FOOTSWITCH x 2
Indicator
MODE LED x 3, EFFECT ON/OFF x 1, TEMPO x 1
Functions
Mode : NORMAL DE LAY, TAPE ECHO, LOOPING RECORDE R
Samplin g Rate : 44.1 kHz (2 9.4 kHz in LOOP TIM : EXT END)
Samplin g Resolution : 16 bit lin ear
Delay Time : NORMAL DE LAY = 23.8 sec ., TAPE ECHO = 5.9 sec
Recording Time : LOOPING REC = 23.8 sec. (1 1.9 sec, in over-dub),
EXTEND = 35.6 sec. (17.8 sec. in over-dub)
Power
requirements
9V DC/160mA, AC-adaptor
Dimensions
140 (W) x 183.5 (D) x 65 (H) mm
Weight
1150g
Accessories
Operator's Manual, AC-adaptor
*** Specifications are subject to change without notice. ****
E2HEADRUSHOperator'sManual
                                              
                                              
8