11
Input Thru function
The MPC2500 can mix the incoming signal from REC IN or DIGI-
TAL IN with the play back sound from the MPC2500. You can
apply effects to the incoming signal and through the two inter-
nal filters. You can control the level, pan, the cut off frequency,
the resonance, etc of the incoming signal with using the Q-Link
sliders and knobs on real-time.
“Input Thru Function” section of the operator's manual. (on page 94)
Q-Link sliders & knobs
By using the Q-Link sliders and knobs, you can con-
trol the parameter such as filter, tune, etc in a pad
with using a slider or knob. For controlling the pa-
rameter in a Pad, there are two ways of “NOTE ON”
and “REAL TIME” and you can use either way..
“Chapter 9 : Q-Link Slider & Knob” section of the operator's manual. (on page 49)
This manual only describes the basic operation of the MPC2500. The MPC2500 has a lot more features for your music cre-
ation. Please read the operator's manual to learn the operation and functions of the MPC2500.
Have fun with the MPC2500!
To Next Page
Loading...
