16
After Sales Support 1300 886 649
5.2 Check o installation
• The setting conditions must be checked prior to initial starting. The under
mentioned items are especially important checking points when the
installation is nished.
• Grounding wire (yellow/Green) is provided in the power cord. The wire must
be grounded.
• Ensure that the unit is connected to a suitably rated and dedicated circuit.
• To avoid vibration or noise, make sure the air conditioner is installed securely.
• Avoid placing furniture of draperies in front of the air inlet and outlet.
5.3 How to drain
The base pan may overow due to high humidity. To drain the excess water, remove
the drain cap from the bottom of the unit (if tted) and attach a drain hose
(not supplied).
1. Take the drain pan which is packed with the unit.
2. Remove the rubber plug from the bottom of the base pan (if tted).
3. Install the drain pan over the area of the cabinet where you removed the plug,
and secure with 2 screws provided.
4. Connect the drain hose to the outlet located at the bottom of the drain pan.
You can purchase the drain hose or tubing locally to satisfy our particular needs
(Drain hose is not supplied).
To Next Page
Loading...
