Akai VS-G415EA

Index
codes
Each time recording
begins,
an index code is automati-
cally added to the video tape.
(lf
recording
is
started lrom
the recording
pause/standby
mode, no indexcodewillbe
added.)This index code is later used during the inlro scan
and index
search operations
While recording, additional index codes can be added by
pressing
the BEC
button on
the remote
control at any
point
you
want.
The index indicator will
aDoear on
the ry
screen.
The intro
scan
feature
searches
for
programmes you
want to
play
back, using the index codes as a
guide.
The intro
scan
fast forwards
the tape to the beginning ot a
re-
corded
programme,
briefly
plays
back
approximately 8
sec-
onds of the
programme,
then fast forwards it to the next
pro-
gramme.
This
procedure
is repeated until the
end of
the tape
or until another mode
(such
as
play
or stop) is engaged.
1
Press
the
MENU/REVIEW
button, select SEABCH
I
with the
./\
/
.'/
buttons and
press
OK.
,'l
Select
the INTRO mode with the
,\ or \,/
button.
L
Press the OK button.
Scanning
will
start
automatically.
The tape counter appears on the
TV
screen.
Press the
>
play
button when
you
tind
gramme
that
you
want to
play
back.
the
pro-
Use
the index
search
mode to
go
directly to the beginning of
any recorded section marked by an
index
code.
You
can skip
as
many index
codes,
in the forward or reverse direction,as
you
like until
you
find the section
you
wish to view
(within
99
sectionsof
your
starting
point).
Playback begins automatically.
I Press the remote control's
>> index search torward
button or
K< reverse button, during the stop or
play
mode, the number ot
index
codes
you
want to skip.
The tape
counter
appears on the TV screen.
The taoe will fast torward or
rewind to the
desired section
and
playback
will
begin
automatically.
Note:
When the index search reverse button
is
pressed
once
in
the middle ol a
programme, playback
willstart lrom the be-
ginning
of
that
programme.
These features will not operate
with tapes that
do
not have
index codes.
During the intro scan and
index
search
modes, the index
number
will
be displayed
on the TV screen and on the FL
display.
The
'SC"
indicator
will light
on
the FL
display.
There mustbe
morethan 1 minute between indexcodesfor
these functions lo operate
properly.
3
4
SEARCH
ELANK
'
I{TFO
23