To Next PageTo Next Page
Need help?Do you have a question about the AKG C451 and is the answer not in the manual?
General| Type | Condenser |
|---|---|
| Connector | XLR |
| Polar Pattern | Cardioid (with interchangeable capsules for other patterns) |
| Frequency Response | 20 Hz to 20 kHz |
| Impedance | 200 ohms |
| Equivalent Noise Level | 18 dB (A-weighted) |
| Power Requirement | 48V Phantom Power |
| Signal-to-Noise Ratio | 76 dB |
Details on product disposal and packaging recycling in accordance with local regulations.
Product introduction and advice to read the manual before operating the equipment.
Lists the items included in the C451 65th Anniversary Edition package.
Information on how to find and choose optional accessories for the microphone.
Highlights key technical and design features of the C451 microphone.
Details the C451 65th Anniversary Edition as a rerun of a classic condenser microphone.
Overview of the microphone's application suitability for various instruments.
Explains the low-frequency boost when microphones are close to the sound source.
Discusses preventing feedback by understanding cardioid polar patterns and speaker placement.
Explains the use of the 10 dB or 20 dB pad to prevent distortion from high sound pressure levels.
Details the switchable highpass filter at 75 Hz or 150 Hz to minimize low-frequency noise.
Instructions for cleaning the microphone body using a soft, damp cloth.
Guidance on washing and drying the foam windscreen properly.
Details frequency range, SPL, noise level, dynamic range, and polar pattern.
Covers preattenuation pad, highpass filter, and powering requirements.
Includes connector type, finish, size, and net/shipping weight.
