To Next PageTo Next Page
Need help?Do you have a question about the AKG C535 EB and is the answer not in the manual?
General| Type | Condenser |
|---|---|
| Polar Pattern | Cardioid |
| Impedance | 200 Ohms |
| Recommended Load Impedance | 1000 Ohms |
| Frequency Response | 20 Hz - 20 kHz |
| Powering | 9 to 52 V phantom power |
| Connector | XLR |
| Signal to Noise Ratio | 72 dB |
| Equivalent Noise Level | <=22 dB(A) |
Read user instructions carefully before using the unit to prevent damage.
Instructions for product disposal and packaging recycling at end of life.
General welcome message and reminder to read instructions.
Lists included items: C535 EB, SA61 stand adapter, and case.
Information on finding and purchasing additional accessories.
Brief description of the C535 EB's design and suitability for professional use.
Description of the built-in mode switch and its function.
Details the die-cast zinc alloy housing, preamplifier, and XLR connector.
Connection diagrams and recommendations for phantom powering using balanced inputs.
Table of standardized resistor values for phantom powering configurations.
Guidance on phantom powering using unbalanced inputs, including diagrams.
Important safety warning regarding incorrect power supply connections.
Detailed guidance on using the C535 EB for vocal recordings.
Recommendations for microphone placement and techniques for acoustic guitar.
Suitability and ideal frequency response for miking the clarinet.
Guidance on microphone placement and techniques for miking the flute.
Easy microphone placement for trumpets due to their radiation pattern.
Schematic diagram of the microphone's internal electronic circuitry.
Visual representation of the microphone's physical dimensions and measurements.
Graphical representation of the microphone's frequency response curve.
Graphical representation of the microphone's directional pickup patterns.
