EasyManua.ls Logo

AKO PROPlus 3PH - Página 24

AKO PROPlus 3PH
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Description
Min
Def
Max.
Input 2 polarity:
Normally openThe input is activated on closing the contact
Normally closedThe input is activated on opening the contact
NC
Inact. with door open (time)
0
0
255
Cold room light timing
0
0
255
Description
Min
Def
Max.
Aux. relay configuration: Disabled
Activated by key Activated byInput Equal state equipment
2nd defrost Pump down control Equal compressor state
Pump
down
Defrost 2 duration
0
30
255
Defrost 2 final temp.
–40.0
8.0
99.9
Defrost 2 sensor: Disabled Probe 2 Probe 3
Def.
Pump down duration
1
30
1800
Pump down On delay
0
60
60
Press. controller config.: Combined HP-LP LP indep. AC input
LP indep. digital input
HP-LP
comb.
AUXILIARY RELAY control
Description
Min
Def
Max.
Access password (to parameters and set point)
00
00
99
Password to Set Point
No
Initial parameters (configures the default values and exits programming)
No
Registry interval
0
15
60
Communication address
0
1
255
Parameters transfer:
Disabled
SendThe unit sends the parameters to the programming key
ReceiveThe unit receives the parameters from the programming key
Def.
Connected sensors:
Sensor 1 Sensor 1 and 2 Sensor 1 and 3 Sensor 1, 2 and 3
S1
Sensors to be displayed
1
1
3
Display mode:
One sensor and clock One sensor and text Sensor, clock and text
S1 and
r.
Display unit
ºC
ºC
ºF
Decimal point
Yes
GENERAL STATUS
24

Other manuals for AKO PROPlus 3PH

Related product manuals