5.- Description
5.1.- Quick access to functions
Pressing it for 5 seconds allows changing the
SET POINT temperature.
Pressing it for 5 seconds activates or
deactivates the CONTINUOUS CYCLE.
Pressing it for 5 seconds accesses the HACCP
events log (See page 24).
Pressing it for 5 seconds activates or
deactivates the defrost.
Silences the alarms (they are indicated on the
display).
Pressing it for 5 seconds activates or
deactivates the Stand-By mode. The display
shows the m symbol in this mode.
SET
SET
SET
SET
Pressing it for 5 seconds allows editing the
description of the unit (See page 15).
SET
Pressing it for 5 seconds accesses the log list
(See page 23).
Pressing it for 5 seconds accesses the display
contrast setting, press N and Q to change it.
SET
SET
Date
Faulty or not connected (flashing)
Loading
Loading finished Battery status
Time
Status
indicators
Temperature
Day of
the week
Display
Browser
Help key
Safety cover
Electrical
protections
Escape key
ESC
It activates or deactivates the cold room light
(terminals 20 and 21). This function stays
active although the unit is in the m mode.
?
9
1565H041 Ed.03
To Next Page
Loading...
