Aksa GE08TI - User Manual

Questions and Answers

J
Jason MayerAug 11, 2025
What to do if Aksa Portable Generator engine output is insufficient?
- K
  katherinesheppardAug 11, 2025
  If your Aksa Portable Generator has insufficient engine output, whether continuously or during acceleration, consider the following: * Insufficient compression pressure: Disassemble the engine. * Incorrect ignition timing: Adjust the ignition timing. * Damage to the spark plug & ignition coil: Repair or replace the spark plug & ignition coil. * Insufficient air intake amount: Clean or replace the air cleaner.
G
Gina BarnettAug 20, 2025
Why is my Aksa GE08TI overheating?
- A
  Alyssa PhillipsAug 20, 2025
  Your Aksa Portable Generator may be overheating due to several reasons: * Insufficient or poor engine oil: Replenish or replace the engine oil. * Insufficient cooling water: Replenish or replace the cooling water. * A loosened, worn, or damaged fan belt: Adjust or replace the fan belt. * Lowered cooling water pump function: Repair or replace the cooling water pump. * Poor thermostat operation: Replace the thermostat. * Incorrect valve clearance: Adjust the valve clearance. * Increased resistance in the exhaust system: Clean or replace the exhaust system.
W
williamsjuliaAug 31, 2025
How to fix abnormal idle operation on Aksa Portable Generator?
- H
  Hannah SingletonAug 31, 2025
  Abnormal idle operation of your Aksa Portable Generator can be caused by: * Incorrect ignition timing: Adjust the timing. * Incorrect valve clearance: Adjust the valve clearance. * Poor valve tightness: Repair the valve. * Cylinder head gasket leak: Replace the gasket. * Wear, stick, or damage of the piston ring: Replace the piston ring. * Damage of spark plug & ignition: Adjust or replace the spark plug & ignition. * Insufficient air suction amount: Clean or replace the air cleaner. * Poor turbocharger: Repair or replace the turbocharger.

Summary

2. GENERAL SAFETY PRECAUTIONS

2.3. Fire and Explosion Prevention

Precautions and warnings related to fire and explosion hazards.

2.4. Mechanical Safety

Safety precautions concerning mechanical hazards and moving parts.

2.5. Chemical Handling Safety

Safety precautions when handling chemicals like oil, coolant, and electrolyte.

2.7. Electrical Safety Practices

Safety precautions for electrical connections and operation.

2.8. First Aid for Electric Shock

First aid procedures for electric shock victims.

3. GENERAL DESCRIPTION

3.2. Generating Set Main Parts

Identifies and describes the main components of the generating set.

4. ELECTRIC STARTING SYSTEMS

5. HEALTH, SAFETY, AND ENVIRONMENTAL

5.1. Fire Protection and Environmental Safety

Fire protection, exhaust gas safety, and environmental considerations.

5.2. Mechanical, Electrical, and Chemical Safety

Safety for moving parts, electrical hazards, chemicals, and voltages.

6. WATER TREATMENT AND LUBRICATION

6.2. Lubricating Oil Recommendations

Recommendations for lubricating oil performance and usage.

7. LUBRICATING OIL

7.2. Lubrication Oil Recommendations

Recommended SAE and API specifications for Doosan engines.

8. PRE-STARTUP PRECAUTIONS

9. GENERATING SET CONTROL SYSTEMS

9.1. Control Panel and System P 732

Details the control panel, its features, and the P 732 system.

10. POST-STARTUP PRECAUTIONS

11. GENERATING SET MAINTENANCE

11.1. Maintenance Schedule

12. ENGINE TROUBLESHOOTING

12.1. Starting and Idle Issues

12.2. Output and Overheating Issues

15. ALTERNATOR TROUBLESHOOTING

Alternator Excitation Issues

Unstable Voltage Troubleshooting

Aksa GE08TI Specifications

General

Frequency (Hz)	50
Voltage (V)	230
Fuel Type	Gasoline
Voltage	230V
Fuel Tank Capacity	25 L
Dry Weight	85 kg
Engine Type	4 Stroke, Air Cooled, OHV
Starting System	Recoil

Related product manuals