1
1. INTRODUCTION
Aksa Generating set is designed to be commissioned,
when delivered, as soon as the necessary cooling wa
-
ter, antifreeze, gas fuel, lubrication oil and fully charged
battery are provided. With its long years of experi
-
ence, Aksa manufactures efficient; reliable and quality
generating set This user and maintenance manual is
prepared to assist the operator in operation and main
-
tenance of the generating set. Observing the advices
and rules in this manual will ensure that the generating
set operates in maximum performance and efficiency
for a long time.
- Care should be taken to perform more frequent
maintenance in dirty and dusty environments in order
-
to keep the generating set in good working condition,
- Necessary adjustment and repairs should be made
only by authorized and qualified persons.
- Each generating set has a model and a serial number
indicated on a label on the base frame. This plate also
indicates the manufacturing date, voltage, current pow
-
er in kVA, frequency, power factor and weight of the
generating set. These data are necessary in spare part
orders, for warranty validity and for service calls.
Attach unit to base-frame with suitable diameter ma
-
sonry anchor bolts long enough to retain the unit.
The generating set is designed to be safe when used
in correct manner. However responsibility for safety
rests with the personnel who install use and maintain
the set. If the following safety precautions are followed,
the possibility of accidents will be minimized. Before
performing any procedure or operating technique, it is
up to the user to ensure that it is safe.
The generating set should only be operated by person
-
nel who are authorized and trained.
Only people that have the right skills should be allowed
to operate, adjust, perform maintenance or repair on
Aksa Power Generation equipment. It is the respon
-
sibility of management to appoint operators with the
appropriate training and skill for each category of job.
Skill level I: Operator
An operator is trained in all aspects of operating the
unit with the push- buttons, and trained to know the
safety aspects.
Skill level 2: Mechanical technician
A mechanical technician is trained to operate the unit
the same as the operator. In addition, the mechani
-
cal technician is also trained to perform maintenance
and repair, as describe in the instruction manual, and
is allowed to change settings of the control and safety
system. A mechanical technician does not work on live
electrical components.
Skill level 3: Electrical technician
An electrical technician has the same qualifications as
both the operator and the mechanical technician. In
addition, the electrical technician may carry out elec
-
trical repairs within the various enclosures of the unit.
This includes work on live electrical components.
Skill level 4: Specialist from the manufacturer
This is skilled specialist sent by the manufacturer or its
agent to perform complex repairs or modifications to
the equipment In general it is recommended that not
more than two people operate the unit, more oper
-
ators could lead to unsafe operating conditions. Take
necessary steps to keep unauthorized person away
from the unit and eliminate all possible source of dan
-
ger at the unit.
The manufacturer does not accept any liability for any
damage arising from the use of non-original parts and
for modifications, additions or conversions made with
-
out the manufacturer’s approval in writing,
To Next Page
