Akuvox R49G User Manual

Blue indicator Light Status
No.
Indicator Light Type
Indicator Light Status
1
Power Indicator Light
 When the device is powered on the light will turn on .
 When the device starts on normally, the light will be
on.
 When the device is powered off, the light will turn off .
2
Network Connection
indicator light
 When the device is powered on but is not connected to
the network, the light will be off.
 When the the device is powered on and the network is
connected, the light will turn on immediately.
 When the device network is disconnected, the light will
turn off. ( the light will be turn on when the network is
reconnected).
3
Call Indicator Light
 When there is no missing call or unread messages
and the device is in stand-by status, the light will be
off.
 When there is no missing call or unread messages
and the device is in receiving incoming calls status,
the light will be flickering.
 when there is no missing call or unread messages and
the device is in dialing out status, the light will stay on.
 when there is no missing call or unread messages and
the device is in dialing out status while receiving a
incoming call, the light will be flickering.
 when there is no missing call or unread messages and
the device is in calling status, the light will stay on.
 when there is missing call or unread messages and
the device is in calling status while receiving a
incoming call, the light will be flickering.
 when there is missing call or unread messages and
the device is in stand-by status, the light will be
flickering.
 when there is missing call or unread messages and
the device is in dialing out status, the light will be
flickering.
 when there is missing call or unread messages and
the device is receiving an incoming call , the light will
be flickering.
 when there is missing call or unread messages with
new missing calls and unread messages, the light will
be flickering.

Akuvox R49G Specifications

General

Mounting	Desk
Handset type	Wired & Wireless handset
Product type	IP Phone
Product color	Black
Flash memory	8000 MB
Internal memory	2000 MB
Operating system version	Android 9.0
Operating system installed	Android
Dual-Tone Multi-Frequency (DTMF) modes	In-band
Caller ID	-
Lines quantity	- lines
Call log entries	600
Phonebook capacity	3000 entries
SIP registrar server	Yes
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Front camera resolution (numeric)	2 MP
Voice codecs	G.722, G.723, G.729, PCMA
Video codecs	H.263, H.264, H.265, VP8
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3az
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	HTTP/HTTPS/FTP/TFTP/SNMP/DNS/SNTP/RTSP/SRTP/RTP/TCP/UDP/TLS/ICMP/DHCP/ARP/DNS-SRV/PNP/ZRTP
WAN connection type	RJ-45
Headset connectivity	3.5mm
USB Type-C ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
Power consumption (typical)	12 W
Storage temperature (T-T)	10 - 90 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	-20 - 70 %
Operating relative humidity (H-H)	10 - 90 %
Number of handles included	- pc(s)

Weight and Dimensions

Depth	98 mm
Width	210 mm
Height	250 mm
Package depth	148 mm
Package width	254 mm
Package height	498 mm
Package weight	1720 g