R49G Guard Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
18. Debug
18.1.System Log for Debugging
System log in the indoor monitor can be used for debugging purpose. If you
want to export the system out to a local PC or to a remote server for
debugging , you can set up the function on the web Upgrade > Advanced >
System Log interface.
Parameter Set-up:
LogLevel: select log levels from 1 to 7 levels. You will be instructed by
Akuvox technical staff about the specific log level to be entered for
debugging purpose. The default log level is “3”.the higher the level is, the
more complete the log is.
Export Log: click the Export tab to export temporary debug log file to a
local PC.
Export Debug Log: click the Export tab to export debug log file to a local
PC.