R49G Guard Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
UDP:select “UDP” for unreliable but very efficient transport layer protocol.
UDP is the default transport protocol.
TCP: select “TCP” for Reliable but less-efficient transport layer protocol.
TLS: select “TLS” for Secured and Reliable transport layer protocol.
DNS-SRV: select “DNS-SRV” to obtain DNS record for specifying the
location of services. And SRV not only records the server address but
also the server port. Moreover, SRV can also be used to configure the
priority and the weight of the server address.
8.4. Call Setting
8.4.1.Call Auto-answer Configuration
R49G guard phone will auto answer incoming calls if call auto-answer is
enabled and auto answer number is set up . To enable or disable on web
Account > Advanced > Call > Auto Answer interface. And set up the
corresponding auto answer parameters on web Phone > Call Feature >
Others interface.