S563
1.Place the device away from sunlight and light sources to prevent potential damage.
2.Do not place the device in the high-temperature, and humid environments or in surroundings impacted by magnetic field.
3.Install the device on the flat surface securely to avoid personal injuries and property loss caused by device’s falling.
4.Do not use or place the device near heating objects.
5.Please keep device at least 2 meters away from light, and at least 3 meters away from window and door.
Direct sun
through window
Indirect sunlight
through window
Close to light
Before You Start
Tools needed
(not included in shipped box)
Cat Ethernet Cable
Crosshead Screwdriver
Voltage and Current Specifications
It is suggested that use PoE or 12VDC 1A power adapter to power on device.
AWG Sizes and Properties Table
Please follow the properly wire data to install device:
Requirements
12VDC 1A
16 18 20 22
13.5 21.4 33.9 48.5
1.318 0.8107 0.3247
≤50
≤50
Power Supply
AWG
Resistance (ohm/km)
Cross-sectional Area (mm²)
Wire Length (m)
≤50
≤40
0.5189
24
79.6
0.2047
≤20
2
To Next Page
Loading...
