AKYAPAK ASM - Protection Factors and Transportation; Protection Checklist and Losses

ASM
USER’S MANUEL
PAGE: 13
03.04-B1
7.1. PROTACTION FACTORS CHECKING LIST
At the control process follow this checking list and mark the quadrant below.To supply
the continuous auditing copy this page.
1.Protactive sheet ; assembly and screwing very reliable.
2.Emer
g
ency stop button ; when you press on the button the machine will stop.
3.Emergency-stoping rope ; assembly very reliable and must working very well.
4.Emergency stop switch :assembly and screw very well.Must working witout
problem.
5.Control panel: must tight the screws and assembly reliable.
6.The ''Warning'' table must stick on the determined places.If one or a few tables
are not on their places,immediately provide the new tables.
7.2. THE LOSSES AT THE TRANSPORTATION
ATTENTION !!!
Take out the plastic protaction package,when you receive the machine.If you fixing from
the transportation any damage,write at the documentation farwording agency this
not,and inform the producer for the looses.
WARNING
*The USER must read the user manuel,use and start the machine in appropriate way .
*The user must not take out the safety elements. ,For example:Switch or Emergency
stop button pulling out ,must not changing. This situation is danger for user and for the
machine also.
After this stimulating explination,the producer is not responsible for the looses.
7.3. THE MACHINE PROTACTION
7.4. TRANSPORT AND RAISING THE MACHINE
Akyapak 3 rolls bending machine,must lift carefuly with crane and helping with rope.
Be careful for the damage at the lifting operations.The producer is not responsible for
the damage arising in this situation.