ASM
USER’S MANUEL
PAGE: 18
03.04-B1
8.5. SAFETY SWITCH
1.) The cover open switch : The cover open switch is using to stop the turning top rolls,for
easily take out the bending sheet metal.
2.) The rope switch :The rope switch is using for the emergency stopping the machine.
9. USAGE
Are you read the user manuel completely?
Are you understand everything?
If you have any problem,please advice the producer.
In spite of this user manuel,for the damages arise from the wrong using,the producer is
not responsible.
If the machine does not starting.
A) Control the emergency stop button is pressed or not.
B) Control the thermic is cuttings or not.
Thecnical macnetic circuit breaker.
1)Present the inside machine electrical panel.For each motor are using.
2)At the extremely current situation the motor this electrical parts stop the current circuit.
3)At the normaly working on the circuit breaker position 1 ,if the motor take the extremely
current the thermic will cutting the circuit machine and the circuit breaker will take the
position 0.To take the position 1 again, the thermic must become cold.
BEFORE BEGIN TO WORK
Read the user manuel and description for the safety.
DANGER !!!
Don’t press on the foot pedal ,before preparing the material and changing the top roll
position.
YOU MAY PREPARE THE MATERIAL.ONLY WHEN THE MACHINE IS CLOSED.
* Take the top rolls on the position you need.
* Put into place the sheet metal.
AKYAPAK 3 rolls bending machine before working must be lubricate.The parts which
must lubricating, are indicating on the rear page.
To Next Page
Loading...
