ASM
USER’S MANUEL
PAGE: 15
03.04-B1
7.7. SETTING KNOWLEDGE
1-All the sides machine must approximetly and easily approuch,and for the maintenance repair
must leave the cavity.
2-The sheet bending on the machine must easily take out,and the sheet lenght must be (L)1,5
rigid and (Lx1,5)cavity.
3-The machine side border must leave a margin cavity 1 meter to moving the bending sheet
material.
7.8. MAIN PLAN
The machine must be connecting on the hard and strong ground for the security of the working
machine.
The cement quality using on the ground basis must be appropriate to the machine weight and the
ground.
The machine must place after 72 hour on the cement spilling ground.
M12
25
0
350
50
To Next Page
Loading...
