AKYAPAK ASM - Machine Knowledge and Safety; Equipment and Safety Factors

ASM
USER’S MANUEL
PAGE: 7
03.04-B1
5. MACHINE KNOWLEDGE
5.1. STANDART EQUIPMENTS
9 The machine body are made from iron constraction.
9 The bottom shaft is with motor+reducer system stimulating
9 The upper shaft is openable auxiliary
9 Cone bending appliances
9 Break motor
9 The bottom and back shaft are moving manuel
9 The control panel and foot pedal are movable
9 Appropriate at CE’ Standards
5.2. SPECIAL EQUIPMENTS
9 Induction hardened rolls
9 Back shaft with motor
9 Digital display
6. SAFETY FACTORS
6.1. THE MACHINE DANGER AREAS
The bottom and upper shafts asymetrical cylinder machine are rotationable.
When the machine is working ,don’t put your hands on the cylinders,and protect your
working dresses from the pressing.It is will be very danger .
When the machine is working,don’t make the maintenance or any
installation
.
When you close the cover,control the rope switch.
After the maintenance of the machine,control the side covers are closed.