Shandong Huasheng Zhongtian Machinery Group Co., Ltd. Shandong Huasheng Zhongtian Engineering Machinery Co., Ltd.
It is required to turn off the fuel valve first when
the machine is idle.
Fuel filling
Caution! Gasoline is volatile, inflammable and explosive. Improper use will cause loss of life and
property. It is therefore required to fill with gasoline according to the following instructions:
Stop the gasoline engine;
Keep far away from open fire;
Do not splash gasoline over the surface of the fuel tank. If any gasoline is splashed, please clean off it
by a cloth;
Please fasten the fuel tank lid securely after top up.
Note! The engine shall be filled with 91# gasoline. If mixture of gasoline and engine oil is used, the starting
performance of the engine will be impaired and the power will decrease.
Check engine oil level and fill with it
Place the gasoline engine in level place and screw off the engine oil dipstick and check that the engine oil
lever is as shown in the figure.
Engine oil maximum
scale
Dipstick
Engine oil minimum scale
Fill with engine
oil to the maximum scale if the engine oil is insufficient.
Change the engine oil if it is too dirty. Please change the engine oil as specified in page 4.
Caution! It is recommended that the engine shall be used at ambient temperature of -15°C ～ 40 C
and be filled with SAE 10W-30 engine oil of API SF or above. The following chart is about SAE engine
oil viscosity.
SAE engine oil viscosity grade
5
To Next Page