Shandong Huasheng Zhongtian Machinery Group Co., Ltd. Shandong Huasheng Zhongtian Engineering Machinery Co., Ltd.
1.4 Notices for Gasoline Engine Use Safety
Hazards are highly potential when the gasoline engine is being operated and filled with fuel! Violation of
the following specified safety instructions may cause casualties.
6
-20 0 20 40 60 80 100°
- 30 - 20 - 10 0 10 20 30
30
10W-30
5W-30
F
SAE 机油粘度等级
环境温度
Do not smoke when filling the gasoline
engine with fuel.
Do not fill fuel with the gasoline engine
which is not completely cooled or still running.
Do not overflow fuel when filling the
gasoline engine with fuel.
Do not fill the gasoline engine with fuel
when open fire is nearby.
It is required to fill the fuel tank with
fuel in a well ventilated place.
It is required to ensure that the fuel tank lid
is fastened securely after top up.。
CAUTION!
Ambient temperature
1.5
Notices for Maintenance S
afety
Equipment which is not well maintained will cause severe potential safety hazard！Regular maintenance
and irregular repair are necessary to enable the equipment work safely for a long time.
Do not attempt to clean or maintain
equipment when it is still running.
Do not change engine speed. It is required to run
the engine at speed specified in section “Technical
Parameters”.
Do not touch or lean on the engine in checking
spark plug. Touch or leaning on the engine in
checking spark plug may cause electric shock.
Do not check spark plugs when inflammable
gas, liquid or material is nearby. Spark may
ignite them.
It is required to reinstall protection devices
after repair or maintenance.
It is required to regularly maintenance the
machine as specified by the Operation Manual.
It is required to replace worn or damaged
parts with original or recommended parts.
It is required to pull out the spark plug
prior to equipment maintenance to avoid
potential accident.
A
TI
2. Gasoline Engine Specifications
2.1 Technical Parameters
Type One-cylinder, air-cooled, overhead Valve, four-stroke
To Next Page
Loading...
