Why can't my smartphone find the AL-KO Automobile Accessories 2LINK box?
Your smartphone might not be able to find the AL-KO 2LINK box for a couple of reasons. First, check that the 2LINK box has a voltage supply, either when driving using the ATC or when stationary using the caravan's internal 12 V supply. Also, ensure that no other smartphone is connected to the 2LINK box, as only one smartphone can be connected at a time.
Why is no ATC status displayed in the AL-KO 2LINK Automobile Accessories app?
If no ATC status is displayed, one possible reason is that the ATC is switched off. Also, the cabling to the ATC might be defective and require checking by a specialist workshop. Another reason could be that the ATC software is not up to date. Ensure that if the serial number ? 2016181022 the ATC is programmed with the latest software.
What to do if at least one sensor is not transmitting information on my AL-KO Measuring Instruments?
If at least one sensor of your AL-KO Measuring Instruments is not transmitting information, it could be due to several reasons. First, the sensor might not have been taught; in this case, you should teach in the sensors. Another potential cause is an empty battery, which requires replacing the sensors. Finally, the sensor itself could be defective, also necessitating a replacement.
General| Brand | AL-KO |
|---|---|
| Model | 2LINK |
| Category | Automobile Accessories |
| Language | English |
To Next Page
