EasyManuals Logo

AL-KO AKS 3004 Assembly Instructions

AL-KO AKS 3004
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PLEASE ENSURE YOU READ THESE INSTRUCTIONS CARE-
FULLY, BEFORE COMMENCING TO OPERATE THIS PRODUCT.
GENERAL:
1) These notes are guidelines for use of the new handle only. They should
be read in conjunction with the “Assembly and Operating Instructions”
leaet, that should have been supplied with your stabiliser. Please refer to
this leaet for full guidance on maintenance/operation and coupling
procedures for AKS 2004 or AKS 3004. If you do not have a copy, please
request the following from our Service Department:
a) Operating Instructions for AKS 2004 - Part No. 1385399
b) Operating Instructions for AKS 3004 - Part No. 1387429
2) When not in use (during travelling or storage), the handle MUST be
removed from the stabiliser and stored within your vehicle. Providing the
stabiliser has been coupled correctly, the removal of the handle from the
stabiliser arms will not interfere with the normal operation of the stabiliser.
3) Suitable for AKS 2004/3004 Stabilisers only.
ASSEMBLY INSTRUCTIONS FOR
REPLACEMENT AKS 2004/3004 STABILISER HANDLE
PLEASE ENSURE YOU READ THESE INSTRUCTIONS CARE
FULLY, BEFORE COMMENCING TO OPERATE THIS PRODUCT.
GENERAL:
1) These notes are guidelines for use of the new handle only. They should
be read in conjunction with the “Assembly and Operating Instructions”
leaet, that should have been supplied with your stabiliser. Please refer to
this leaet for full guidance on maintenance/operation and coupling
procedures for AKS 2004 or AKS 3004. If you do not have a copy, please
request the following from our Service Department:
a) Operating Instructions for AKS 2004 - Part No. 1385399
b) Operating Instructions for AKS 3004 - Part No. 1387429
2) When not in use (during travelling or storage), the handle MUST be
removed from the stabiliser and stored within your vehicle. Providing the sta-
biliser has been coupled correctly, the removal of the handle from the stabiliser
arms will not interfere with the normal operation of the stabiliser.
3) Suitable for AKS 2004/3004 Stabilisers only.
ASSEMBLY INSTRUCTIONS FOR
REPLACEMENT AKS 2004/3004 STABILISER HANDLE

Other manuals for AL-KO AKS 3004

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AL-KO AKS 3004 and is the answer not in the manual?

AL-KO AKS 3004 Specifications

General IconGeneral
Maximum Towing Capacity3000 kg
StabilizerYes
Maximum Gross Weight3000 kg
Maximum Nose Load150 kg
Wear IndicatorYes
SecurityLockable
MaterialSteel
ColorSilver
Coupling Head50 mm ball
Friction Pads4
TypeStabiliser coupling
Compatibilitytrailers
Weight4.2 kg

Related product manuals