AL-KO IQ7 - Wiring Loom

Wiring Loom
The AL-KO iQ7 Wiring Loom has been designed to simplify the installation process.
Actuator
Actuator
Bow Post
Mounting bush
Rubber grommet
Over tightened Correct
Brake Fluid
Reservoir
Master
Cylinder
Port
Pressure
Dump Valve
100mm
140mm 168mm
281mm
Diameter: 6.0mm of 1/4”
Maximum Fluid Level
Minimum Fluid Level
Diagram 1.
Attaching the
bleed gun to
the actuator.
Bleeding
(Diagram 2)
5
alko.com.au