What to do if my AL-KO Chainsaw motor does not run?
If the motor of your AL-KO Chainsaw doesn't run, first ensure it's properly connected to a power source. If it is, a defective power cord could be the cause, requiring a replacement. Also, check if the chain brake is engaged and, if so, release it.
Why is there no chain lubrication on my AL-KO KE 1800/40 S?
If your AL-KO Chainsaw isn't lubricating the chain, the oil tank might be empty. Check the oil level and top it up with saw chain oil. Another possible cause is a dirty guide bar. Clean the oil supply borehole and oil groove.
General| Power | 1800 W |
|---|---|
| Bar Length | 40 cm |
| Weight | 4.5 kg |
| Power type | Electric |
| Chain Pitch | 3/8" |
| Chain Gauge | 1.3 mm |
| Chain type | Oregon |
Instructions for handling, posture, and avoiding kickbacks.
Warning about kickback and detailed steps to prevent it.
Steps for guide bar, chain, and tension adjustment for KE 1800/35.
Mechanical and running tests for chain brake functionality.
Safety and preparation for felling trees.
Detailed steps for making felling cuts and notches.
Common issues and their corrective actions.
To Next Page
