Alan alan441 User Manual

®
VOX
CHANNEL
CALL ENTER
F
CALL
BSCAN DW VOX SAVE
BEEP
1
12
13
6
7
8
9
3
10
11
2
5
4
The World in Communication
®
14
A
A”
A
A”
A
A”
Content
• 2 ALAN 441 transceivers
• 1 user instructions
8 CHANNELS
PMR446 TRANSCEIVER
Congratulations on your purchase!
ALAN 441 is a new generation PMR
446 transceiver which may be used,
without license, in all the countries in
which Pan-European PMR446 fre-
quencies are authorised (446.00625 –
446.09375 MHz). Please consult the
“Restrictions on the use” charts for
information regarding country specif-
ic limitations.
Main features:
• Freq. 446.00625 ÷ 446.09375 • Channel spacing: 12.5 KHz • 8 channels • Power 500 mW ERP • Coverage up
to 4÷5 km • VOX adjustable in 3 levels • Batteries: AAA type, rechargeable or alkaline • Alphanumeric backlit LCD
Display • Battery life up to 35 hours (alkaline type) • Operating temperature –20° +55° • Weight 78 gr • Size
54x87x34 mm • Jack MIC CHG [13]: 2 pins for audio accessories and wall charger
Specifications are subject to change without notice.
To open the battery compartment, hold the unit face down and unhook the battery holder in the lower part
of the radio; gently slide the cover towards the bottom of the radio. ALAN 441 accepts 3 x AAA alkaline or
rechargeable batteries.
Display lighting: When you press [7], the display lights up for 10 seconds approx.

Alan alan441 Specifications

General

Frequency range	26.965-27.405 MHz
Output power	4 W
Type	Transceiver
Modulation type	FM
Modulation	FM

Summary

PMR446 Transceiver Overview

Main Features

Lists key technical specifications and capabilities of the PMR446 transceiver.

Display Lighting

Explains how to activate and the duration of the display illumination.

Basic Operation and Settings

Turning On the Device

Instructions for powering on the ALAN 441 transceiver and initial display indication.

Volume Adjustment

Guide on how to adjust the audio volume level using the dedicated knob and button.

Channel Selection

How to select channels and their corresponding frequencies on the transceiver.

Transmission

Steps and tips for speaking into the radio during transmission.

Receiving Signals

How to receive signals by releasing the PTT button.

Background Noise Reduction

Explanation of the autosquelch feature and how to deactivate it.

Automatic Power Save

How the transceiver conserves battery power when idle.

Advanced Features and Settings

Microphone and Charger Jack

Details about the MIC/CHG jack for accessories and charging.

Keypad Lock Function

Instructions on how to lock and unlock the keypad for accidental presses.

Hands-Free Transmission (VOX)

Information on the VOX capability for hands-free operation and baby-sitter mode.

VOX Activation

How to enable the VOX function for automatic voice-activated transmission.

VOX Sensitivity Setting

Guide to adjust VOX sensitivity levels (L1, L2, L3).

VOX Delay Adjustment

How to set the delay for the VOX transmission to prevent cutting off speech.

Additional Functions and Modes

Disabling VOX Mode

Steps to turn off the VOX (Voice Operated Exchange) feature.

Roger Beep Tone

How to enable the end-transmission confirmation beep (Roger Beep).

Disabling Keypad and Beeps

Instructions to disable button press beeps and keypad lock sounds.

Scan and Busy Scan Modes

How to use SCAN and B.SCAN to monitor channels for activity.

Dual Watch (DW) Function

Enabling Dual Watch to scan two selected channels simultaneously.

Resetting the Device

Procedure to reset the ALAN 441 to factory default settings.

Country Restrictions Summary