Need help?Do you have a question about the Alan HM35 and is the answer not in the manual?
General| Brand | Alan |
|---|---|
| Model | HM35 |
| Category | Transceiver |
| Language | English |
Provides crucial descriptions to avoid inconvenience, damage to the device, or danger to persons.
Details precautions for safe operation, avoiding damage to objects or people, and proper handling.
Step-by-step instructions for powering the radio on and off using the main knob.
Explains the purpose and usage of the monitor function for weak signals or monitoring all traffic.
Detailed steps for transmitting, including microphone handling and PTT button usage.
Explanation of the TOT feature that limits continuous transmission time.
Describes the BCLO function that prevents transmission on busy channels.
Instructions for selecting between high and low transmission power levels.
Detailed guide on navigating through the radio's command menu and sub-menus.
How to adjust microphone sensitivity for optimal performance in noisy environments.
Describes how audio is activated only for correct CTCSS/DCS or selective call signals.
Details on transmitting CTCSS/DCS tones and various types of selective calls.
Explains that CTCSS/DCS tones are automatically sent upon transmission if programmed.
How to send fixed or variable selective calls using function keys or the menu.
Procedure for sending variable selective calls, typically using the keypad microphone.
Instructions for sending an emergency call, its purpose, and activation methods.
Helps follow radio traffic by automatically scanning programmed channels.
How to use an internal attenuator to reduce receiver sensitivity in strong signal areas.
To Next Page
