Use of commands/options
7.2 Summary table for the command menu
The following table summarizes the functions of each sub-menu/setting available on your radio.
Each sub-menu/setting will be explained in detail, and its location can be found by referring to the last column of this table.
SUMMARY TABLE FOR COMMAND MENU
Main Menu Sub-menu Brief Description Type of command or Value available Par.
Radio Param Monitor
Temporary exclusion Squelch/CTCSS/selec-
t
ive calling
if monitor is activated
6.6
Squelch
Squelch regulation (suppression of back-
g
round noise in standby)
Bar indicator
6.5
Power
Output power setting Hi (high) / Lo (low)
6.7.c
Lock/Dist
Reception sensitivity attenuator L
(activated) / D (deactivated)
10.4
TlkAround
Allows for single-frequency communication at
repeater output (in case of breakdown)
if Talk Around is activated
10.5
Mic.Sens.
Regulation of microphone sensitivity Lo (low) / Hi (high)
8.1
Scrambler
Activation of optional scrambler board (if in-
s
talled)
if the scrambler is activated
10.6
Int.Spkr Off
Deactivation of internal speaker
if the speaker is deactivated
8.4
Calls Call 1
Send fixed selective call - Call 1
Press
to send immediately
9.2.b
Call 2
Send fixed selective call - Call 2
Press
to send immediately
9.2.b
User Call
Send variable user-defined selective call Typing variable digits on the keypad
microphone
9.2.c
Emergency
Send Emergency selective call
Press
to send immediately
9.2.d
To Next Page
Loading...
