Alan HM35 - Sending a variable selective call; Sending an emergency selective call; Advanced Functions

English
24
Use with CTCSS/DCS and/or Selective call
is off or flashing orange.
2) Press the
button to access the command menu, then use the
buttons to highlight the Calls option.
3) Press
to view the selective calls available:
• Call1 – fixed call 1
• Call2 – fixed call 2
• User Call (variable selective call)
• Emergency (emergency call)
4) Press the
buttons until Call 1 or Call 2 is highlighted,
then press
to make the call. The device will automatically re-
turn to the standby screen.
9.2.c Sending a variable selective call
The selective variable is only available through the keypad micropho-
n
e (mod. MK06/35-K).
If the channel has been programmed to emit a selective variable, a *
symbol will appear on the bottom left of the display, followed by the
predefined variable digits. A selective variable can be sent using two
methods:
Emission via microphone
Key in the variable digits using the microphone keypad, then press the
*CALL button on the microphone.
Emission via the menu
1) Key in the variable digits using the microphone keypad.
2) Follow steps 2 and 3 from the par. “Sending a fixed selective call
from the menu”.
3) Press the
buttons until User Call is highlighted, then
press
to make the call.
9.2.d Sending an emergency selective call
This is a special call that is sent repeatedly in cycles on a predefined
channel based on the radio’s programming.
Use this emergency call only if you find yourself in a real con-
dition of necessity which requires assistance. Speak to your
radio network administrator about its use.
Your radio can be programmed to deactivate all other commands
when it is making an emergency call.
An emergency call can also be sent using the Input/Output
connector.
Emission via microphone
Hold down the 3EMG button on the keypad microphone until the
emergency selective call is emitted, then release.
Emission via the menu
1) Follow steps 1 and 3 from par. “Sending a fixed selective call from
the menu”.
2) Press the
buttons until Emergency (emergency call) is
highlighted, then press
to make the call.