Above all...safety!
(EME) at radio frequency (RF), and as such must be installed and
placed in operating conditions that are in conformity with the in-
s
tructions contained in this manual and with current regulations.
Failure to follow these instructions can cause personal injury and/
or serious malfunction of the device.
• It is very important to follow the requirements relative to the pre-
v
ention of radio frequency exposure. Unauthorized changes or
modifications to this device may invalidate conformity to regula-
t
ions. All changes or modifications to the radio must be approved
in writing by the manufacturer.
• Ensure that your power supply corresponds to the values cited in
this manual. In case of doubt, contact your local vendor.
This product conforms to requirements of the Council Directives
89/336/EEC and 73/23/EEC regarding the acknowledgement of
the laws of the Member States, and relating to electromagnetic
compatibility and low voltage, as well as to the automotive regula-
t
ion CE95/54.
2.4 Assistance
We urge you to write the serial number of your transceiver in the space
provided below. This number is found on the transceiver’s identifying
label. This number will be useful in the event of repair/assistance
and/or loss and/or theft of the device.
Serial number_______________________
To Next Page
Loading...
