Alarm.Com ADC-AC-ET20 User Manual (English)

To Next Page

Single Gang Reader (ADC-AC-ET20) - Installation Guide

The Single Gang Reader (ADC-AC-ET20) offers a modern aesthetic and a state-of-the-art feature set. Standard

technologies include Proximity (125 kHz), NFC (13.56 MHz), and Bluetooth. The Single Gang Reader

is fully OSDP compliant and is enabled for Secure Channel. Additionally, the reader offers a patented feature

called OSDP Auto-Detect. The reader communicates OSDP and Wiegand over the same wires to automatically detect

and convert to OSDP Secure Channel protocol, eliminating the need to rewire or reconfigure the reader.

Mount the wall plate

Connect the wall plate to the single gang box using the provided #6 screws. Alternatively, the reader can be mounted

using the provided #4 screws in the four outer holes for other installation requirements. Drywall installations will require

molly bolts.

https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Access_Control/Access_Control_Entry%2F%2FExit_De…

Updated: Mon, 08 Apr 2024 20:56:52 GMT

Need help?

Do you have a question about the Alarm.Com ADC-AC-ET20 and is the answer not in the manual?

Alarm.Com ADC-AC-ET20 Specifications

General