Alarm.Com ADC-VDB770 - Page 10

6. Install the doorbell backplate to the mounting bracket using the included machine screws.
7. Attach the doorbell to the backplate by aligning and pushing together until it clicks into place and the connection is
well sealed.
8. Turn the electricity back on. Check that the doorbell camera’s light is flashing white after the boot process is
complete.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7…
Updated: Wed, 25 Oct 2023 20:50:59 GMT
10