Need help?Do you have a question about the Alarm Lock DL2500-SERIES and is the answer not in the manual?
Procedure for changing the Master Code, which controls all lock functions and programming.
Code for programming user codes and features, excluding Master Code and Passage Function.
Entry-only codes for up to 15 users, programmed via Master or Management Code.
A one-time entry code for temporary access, which erases itself after use.
Features to prevent single users or entire banks from accessing the lock.
Setting the duration the lock remains unlocked after a valid code entry.
Function to keep the lock continuously unlocked until reprogrammed.
How to enter digits using multiple buttons for code programming.
Lockdown mechanism activated after multiple invalid code entries to prevent tampering.
Instructions for replacing batteries and preserving memorized codes.
General| Power Supply | Battery |
|---|---|
| Weather Resistant | Yes |
| Access Method | Keypad |
| Programming | Keypad |
| Voltage | 6V |
To Next Page
