111
RCP-1001 Description
BPM Studio
Now, using the
[SET]
-key [21] function, you can
switch it on/off.
Continous Play :
If this mode is activated, then next title in the
Playlist will be automatically loaded and played
at the end of the current title.
Single Play :
If this mode is activated, then next title in the
Playlist will be automatically loaded but not started
at the end of the current title.
Shuffle :
The titles in the Playlist will be played in random
order. Each change of the Playlist will cause a
random new title order of list as long as this mode
is enabled.
Repeat :
If this function is active, then the loaded title is
played continuously. If this function is turned off,
then the next title of the list will be loaded.
[21] SET Button
(Also BPM Match key) The current BPM value of
respective (Master) Player will be taken over by
pressing the SET key in Standard Mode. Read
also chapter ‘Beat-Matching using BPM Studio’.
Please read in this chapter the exact description
of the function of the SET button. If the
Programming Mode is active (
[MODE]
-key [19]
pressed), pressing the SET key will then switch
that function on or off.
[24] Pitch Button
Using this key, you can deactivate the settings of
the playback speed via the
[Pitch slider]
[10].
Reverse side sockets:
To Next Page
Loading...