69
Program Options
BPM Studio
CD Type
Here you can select out of the list of your CD-
ROM drives. This setting is only necessary when
you are experiencing problems while reading in
CDs, and “AutoDetect” does not solve the
problem.
Internal MP3 Code
When encoding, BPM Studio’s own internal code
is used (Recommended). If additional codes are
installed on your PC, they can also be selected
here.
Write RIFF Wave
Writes a MP3-Wave-File, that is compressed, but
can still be played on most Windows players.
Format
This selection field shows all audio compression
codes available on a system. The BPM Studio’s
own supplied MPEG Layer 3.
Format Options
Here the quality of the compression is defined.
(Depending on file format). It should be at least a
128 kBit/s, 44,100 Khz stereo.
To Next Page
Loading...