Alcatel-Lucent 400 DECT Localisation And Notification Management

4
Configuration documentation
1
4
 Edit notify screen
You can only access this screen if the handset has been previously registered to the selected system
• Status: allows the administrator to activate or deactivate the live signal, notification, key
events and status features.
•Mode: allows you to select Enterprise or Office mode. Depending on the selected mode,
the message will contain reduced or full location data. Only office mode can be used with
Office Communication solutions, while Office or Enterprise modes can be used with an
OmniPCX Enterprise call server, depending on the connection type between the call server
and the alarm server. Mode selection is performed once for all the notification features.
• Acces1, Access2: allows you to enter the two access prefixes of the trunk used to call the
server. First enter the main access and then the second or back-up access (if any).
Access programming is performed once for all the notification features.
•Live delay: allows you to enter the time between two signal messages sent by the handset.
1.3
How to program live calls
T
Access to the configuration menu
T Activate the Live signal
Live signal calls are calls that are automatically made by the handset to the notification server. This
live signal is designed to notify the server that the phone has coverage and is working. A tick
indicates that the mode has been selected.
Edit notify
Enter the handset
administration code
Select one system
Edit notify Status Live
123
123
Password?
. . . .
123
SYSTEM 1
SYSTEM 2
Lock to any
400GEO-203

Alcatel-Lucent 400 DECT Specifications

General

Backlight color	White
Backlight display	Yes
Display resolution	98 x 66 pixels
Display number of colors	4096 colors
Type	DECT telephone
Intercom	-
Handset type	Wireless handset
Answering machine	No
Microphone frequency	1880 - 1900 Hz
Phonebook capacity	- entries
Mounting type	Desk
Product color	Black, Chrome
Number of handsets included	1
Standby time	160 h
Battery recharge time	3.5 h
Certification	ETS 300 019-1. In use Class 7.2, ETS 300 019-1-7, ETS 301 489-1
Operating temperature (T-T)	-5 - 45 °C

Weight and Dimensions

Depth	22 mm
Width	45 mm
Height	120 mm
Weight	110 g