Alcatel-Lucent 400 DECT Localisation And Notification Management

9
Configuration documentation
1
9
T Activate the Status call
Status calls are calls that are automatically made by the handset to the notification server. As status
calls are made when the handset is put in the charger or removed from the charger, as well as
before power off or after power on, this feature notifies the server whether the user can be
reached or not. This may be used in the event of emergencies and the user may or may not be
called, depending on handset status.
T Select the mode
The default mode is Enterprise.
T Select Access
There is no default value and a maximum of four digits can be keyed in. Authorised digits are 0 to
9, * and #. If there is only one access, only access 1 must be keyed in, access 2 must left empty.
Behind Office communication solutions (office mode) only up to 3 digits are allowed.
Edit notify Status Status
Edit notify Mode
Enterprise Office
Edit notify Access1 Access2
Enter the prefix to access the trunk
line or security personel set in
fallback mode
OR
OR

Alcatel-Lucent 400 DECT Specifications

General

Backlight color	White
Backlight display	Yes
Display resolution	98 x 66 pixels
Display number of colors	4096 colors
Type	DECT telephone
Intercom	-
Handset type	Wireless handset
Answering machine	No
Microphone frequency	1880 - 1900 Hz
Phonebook capacity	- entries
Mounting type	Desk
Product color	Black, Chrome
Number of handsets included	1
Standby time	160 h
Battery recharge time	3.5 h
Certification	ETS 300 019-1. In use Class 7.2, ETS 300 019-1-7, ETS 301 489-1
Operating temperature (T-T)	-5 - 45 °C

Weight and Dimensions

Depth	22 mm
Width	45 mm
Height	120 mm
Weight	110 g