Alcatel-Lucent 5620 - Page 27

2 — 1830 PSS alarms
Alcatel-Lucent 5620 Service Aware Manager, Release 9.0 R4 September 2011 2-3
3HE 06513 AAAD TQZZA Edition 01 Optical Alarm Reference
Name: AmpInputLowNotif (1975)
Type: equipmentAlarm (3)
Probable cause: OprpWRLow (960)
Severity: Info
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): No
The alarm is raised when the input
signal of an amplifier is too weak.
Name: AmpOutputPowerUnachievable
(1976)
Type: configurationAlarm (11)
Probable cause: OprUnachieve (961)
Severity: Minor
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised due to output
power unachievable.
Name: APRActive (1965)
Type: configurationAlarm (11)
Probable cause: AprLine (950)
Severity: Major
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when APR is
active.
Name: AprInvalidTopo (3332)
Type: configurationAlarm (11)
Probable cause: APRINVALIDTOPO (1165)
Severity: Major
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when APR is
active and reports an invalid
topology.
Name: AprNode (3333)
Type: configurationAlarm (11)
Probable cause: APRNODE (1166)
Severity: Major
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when APR
activates.
Name: AprOsc (3334)
Type: configurationAlarm (11)
Probable cause: APROSC (1167)
Severity: Major
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when APR
activates and reports an unavailable
OSC.
Name: AprSwitch (3335)
Type: configurationAlarm (11)
Probable cause: APRSWITCH (1168)
Severity: Major
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when APR
performs a port switch.
Name: AprUnavail (3336)
Type: configurationAlarm (11)
Probable cause: APRUNAVAIL (1169)
Severity: Major
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when APR is
unavailable because a monitor card
is initializing.
Name: AprUnavailOsc (3337)
Type: configurationAlarm (11)
Probable cause: APRUNAVAILOSC (1170)
Severity: Major
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when APR is
limited or unavailable because of an
OSC SFP failure.
Name: APSchannelMismatch (1967)
Type: configurationAlarm (11)
Probable cause: ApsCM (952)
Severity: Info
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when there is an
APS channel mismatch.
Name: APSModeMismatch (1966)
Type: configurationAlarm (11)
Probable cause: ApsMismatch (951)
Severity: Info
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when there is an
APS mode mismatch.
Alarm Attributes Description
(2 of 37)