2 — 1830 PSS alarms
Alcatel-Lucent 5620 Service Aware Manager, Release 9.0 R4 September 2011 2-43
3HE 06513 AAAD TQZZA Edition 01 Optical Alarm Reference
Table 2-4 Domain: ospf
Table 2-5 Domain: sw
Name: TransportServiceDown (2906)
Type: serviceDown (88)
Probable cause: PortOperationStateDown
(1112)
Severity: Critical
Object Type (class):
TransportService
Domain: optical
Implicitly cleared (self-clearing): Yes
The alarm is raised when the
Operational State of a XC is down or
port Operational state is down.
Name: TransportServiceMisConfigured
(3602)
Type: configurationAlarm (11)
Probable cause:
OchCrossConnectionTrailNameMisMatch
(1391)
Severity: Critical
Object Type (class):
TransportService
Domain: optical
Implicitly cleared (self-clearing): No
The alarm is raised in following cases
- case 1 : when all the OCH Cross
Connections of an OCH trail do not
have the same Trail Name . In order
for the auto wavekey processing to
work properly, the XC name should
be the same on all NEs of the OCH
Trail.
Alarm Attributes Description
Name: OspfInterfaceDown (141)
Type: OspfInterfaceDown (24)
Probable cause: OspfInterfaceDown (112)
Severity: Warning
Object Type (class): Interface
Domain: ospf
Implicitly cleared (self-clearing): Yes
The alarm is raised when an OSPF
interface is operationally down.
Alarm Attributes Description
Name: BootableConfigBackupFailed (103)
Type: configurationAlarm (11)
Probable cause: fileTransferFailure (89)
Severity: Major
Object Type (class):
BackupRestoreManager
Domain: sw
Implicitly cleared (self-clearing): Yes
The alarm is raised when the 5620
SAM fails to back up a set of NE
configuration files.
Name: BootableConfigRestoreFailed (104)
Type: configurationAlarm (11)
Probable cause: fileTransferFailure (89)
Severity: Major
Object Type (class):
BackupRestoreManager
Domain: sw
Implicitly cleared (self-clearing): Yes
The alarm is raised when the 5620
SAM fails to restore a set of NE
configuration files.
Name: SaveConfigFailed (105)
Type: configurationAlarm (11)
Probable cause: fileAccessError (90)
Severity: Major
Object Type (class):
BackupRestoreManager
Domain: sw
Implicitly cleared (self-clearing): Yes
The alarm is raised when the admin
save command on an NE fails.
Name: VersionConfigRestoreFailed (536)
Type: configurationAlarm (11)
Probable cause: versionMismatch (405)
Severity: Major
Object Type (class):
BackupRestoreManager
Domain: sw
Implicitly cleared (self-clearing): Yes
The alarm is raised when the restore
procedure on an NE fails because of
a mismatch between the backup file
set version and the NE software
version.
Alarm Attributes Description
(2 of 2)