The Client Classes tabConfiguring 8950 AAA Client Properties
............................................................................................................................................................................................................................................................
365-360-001R6.0
Issue 1, December 2008
5-19
............................................................................................................................................................................................................................................................
Using the Custom tab in the Client Class Properties
To use the other client attributes or customized properties of a Client Class, click on the
Custom tab in the Client Class Properties panel.
The Custom tab is displayed with a set of action buttons under the Other Client
Attributes section.
The Custom tab also allows you to perform the following actions using the action buttons:
• Insert a record
• Edit selected record
• Delete selected record
• Delete all records
• Make a copy of selected record
• Move selected record up
• Move selected record down
You can perform any of the required actions using these action buttons.
To add or Insert a record to the Client Class Properties panel, click on the action
button. The Attribute Properties panel is displayed as shown in Figure 5-15.
Diameter Charset Specifies the default character set to use for
character based Diameter AVP values which are
lacking a defined endcoding.
Figure 5-14 The Client Class Properties–Properties tab information
Field Name Description
To Next Page
Loading...